LT EN SE

Tees

 


Stainless steel tees

The purpose of the stainless steel tees is to angle the flow in the piping system at a 90° angle. They are used in the supply systems of water, gas and fuel. Steel is an irreplaceable metal, which has great anti-corrosion characteristics and a long exploitation time compared to other metals. Stainless steel tees are particularly used in toxic environments, underground and in cases of high pressure.

Bos Inox – for optimum working systems

Stainless steel tees are either straight or bent. Straight tees have the same diameter as their pipe. Bent tees have smaller diameters, which form a thinner flow. Bos Inox is proud to have a range of both types of tees. The assortment is not only for the types but also for the variety of measurements of tees.

If you can’t find your required product, fill in the request form. The success of your project is important to us, therefore we will get back to you shortly and will provide you with any information you need and help you choose best suited products.

 

 

 DN  D1  L  H  T  Weight
8 13.5 25.5 5 1.5 0.022
10 17.2 25.5 10 1.5 0.024
 15  18  35  10  1.2/1.5  0.050
15 21.3 25.5 12 2 0.044
 20  22  40  12  1.2/1.5  0.070
20 26.9 28.5 15 2 0.063
 25  28  50  16  1.2/1.5  0.178
25 33.7 38 19 2 0.107
32  34  55  19  1.2/1.5  0.185
32 42.4 47.5 24 2 0.179
 40  40  60  23  1.2/1.5  0.190
40 48.3 57 26 2 0.242
 50  52  70  29 1.2/1.5
 0.245
50 60.3 63.5 34 2 0.345
 65  70  80  38  1.6/2.0  0.640
65 76.1 76 42 2 0.532
 80  85  90  46  2  0.660
80 88.9 85.5 48.5 2 0.679
 100  104  100  60  2  1.140
100 114.3 105 63 2 1.095
 125  129  125  71  2  1.500
125 139.7 124 76 2 1.514
 150  154  143  85  2  2.000
150 168.3 142 92 2 2.129
 200  204 -
-
-
-
200 219.1 179 122 2 3.371
250 273 216 151 2 5.067